The C.A.M.P. crampons are designed for alpinism on snow, ice or mixed routes. They should be adapted to the intended use and to the types of boots, as shown in able A (in booklet)

Note: the boots’ sole should be rigid or semi rigid. The sizes are approximate: they could change between the different models of boots.

For carrying the crampons use a suitable bag (ref. 1385, 416).

In order to reduce the danger of snow balling up under the crampons, always use your crampons with the Antibott C.A.M.P.

Revision:

In addition to the normal inspection required before, during and after each use, this product should be annually examined by a competent person; the recording of this check should be done on the life sheet of the product.

1) In case of one of the following defects are present, the product should be withdrawn from service immediately:

• Point’s length less than 1 cm
• Cracks on plastic or metallic parts, particularly on horizontal structures
• Permanent deformation of a metallic part
• Modification to the crampon (welding drilling…)
• Deep corrosion (that do not disappear after a light rubbing with glass paper)

Do not continue to use a product after a major fall, because a damage may have occurred, even no external signs are visible.

2) In case of one of the following defects, the defective part should be changed:

• Cut, tears and abrasions of the attachment systems
• Non-locking of the attachment systems.
• Breaking of an Antibott attach or serious cut.

Always use original C.A.M.P. spare parts in order to keep the performances and the guarantee.

Product comes with instruction booklet and bag for crampon storage. Full care, health & safety and wear instructions can be found in instruction booklet.